- Comunicati pubblicati - fifa 19 - Comunicati pubblicati - fifa 19 Mon, 28 Sep 2020 05:27:14 +0200 Zend_Feed_Writer 1.12.20 ( NBA 2K21 Passing Tips Fri, 11 Sep 2020 09:46:31 +0200 fifa 19 fifa 19 The NBA 2K21 has been released for around a week, have you started the exciting basketball matches? Passing is an important skill in the game, and each movement may make sense for your shooting, here are some NBA 2k21 passing tips for getting better in competitions. 


Jump Shot

Try to take down the jump ball at the beginning as much as possible, so you have to send a high center to fight for the high jump. After all, the center's jumping ability and flexibility are relatively good. If there is a small forward with excellent physical fitness in the team, you can also send him to participate in the jump ball. The technical content of the jump ball itself is low. When the referee throws the basketball up the next moment, you immediately press the key 4 to take off, and you will have a greater chance to win the ball. The key to winning the ball is to see the jumping time (the faster one has the advantage) and the jumping ability. After winning the ball, pass the ball forward as soon as possible. After all, the main purpose of the opening game is to try the hand feel, so there is no need to be afraid of hands and feet. Best jumpshot in NBA 2K21 and more details are available on, which is also a good place to buy NBA 2K21 MT if you are requiring it. 



"Out of bounds, out of bounds, or out of bounds." obviously, the success rate of this generation of air relay has been lowered. In the versions before 2k17, as long as our catcher runs to the basket and is about 50cm away from the opponent's defender, he can receive the ball smoothly. First of all, there are still not too many specifications for passers-by. As long as you pass the midfield, you can throw the accurate air relay pass by clicking the key 4 twice in a row. As for the catcher, he needs to get rid of defense at least 100 cm. At this time is to test the player's eyesight. If you can't see the ball again, if you are lucky, the ball will go out of the bottom line. If you are not lucky, it will be passed directly to the opponent's defensive player. Therefore, at the moment of passing, you should not only consider the distance between the receiver and the defender, but also pay attention not to have more than one defensive player on the passing route. The ball goes out and the catcher gets the ball, but the catcher may not be able to dunk immediately unless he is close to the basket at the moment of receiving the ball. If you can't immediately dunk, lay up and so on, you have to treat the air relay as a simple aerial pass, and then make a new round of attack. In order to play up your momentum, it is suggested to launch the air relay in a certain fast break with less playing. This kind of dunk has a very high ornamental value, and there must be slow mirror playback.


Boundary ball

After a pause, a non free throw foul, or a ball out of bounds, you get a backcourt ball or a boundary ball. If the boundary ball is played in your own half, the opponent will not intercept it unless the other side implements a press tactic. If the boundary ball is played in the opponent's half court, the opponent will certainly press. At this time, you should control the catcher to bypass the defensive player, go to the vacant position, and then press the key (2) to ask the teammates to pass the boundary ball. Remember that this process is only 5 seconds. If it exceeds the time, the ball right will be owned by the opponent. When the score is 2 or 3 points away, the opponent may take the initiative to hit your basketball out of bounds, resulting in the interruption of your offensive momentum. If you can get a boundary ball at this time, please do not hesitate to run to the favorable position for a three-point long shot, which may become your winning goal.

How to Choose LCD Screen Thu, 10 Sep 2020 09:21:41 +0200 fifa 19 fifa 19 With so many different types of LCD screens on the market, which one should you choose and how to make the decision? Here are some factors you should consider. 


1. Size

First of all, choose the size of the LCD screen, which is generally marked as 17 "and 34". In fact, it is not so large when it leaves the factory. The default value set by the factory for you is a smaller area on the screen. If you want to choose a mini lcd screen, 0.96 inch mini lcd screen spi interface, 0.96 inch mini tft display of is a very small tft display is only 0.96" in diagonal, packed with RGB pixels, for making very small high-density displays. There are also 3.5 inch IPS tft display and other sizes for selection. 


2. Resolution

The relationship between LCD size and optimal resolution. For example, if you choose a 15 inch LCD, you have to accept a resolution of 1024 × 768, because only at this resolution will the picture be clear. Then you have to consider whether you should choose a 17 inch or 19 inch LCD. Otherwise, you will have to suffer from various defects such as blurred fonts, ghosting, blurred images, etc., as well as problems such as slow game speed and incomplete display of pictures when watching TV.


3. Response time

Due to the variety of LCD itself, the standard of test response time is not uniform, and the test method is also very complex. Therefore, in fact, the industry does not have a very strict reference standard for the important parameter of response time. Consumers can only rely on official information and can not judge by their own test. Generally speaking, the response time of liquid crystal display includes rise time and fall time. The rise time is the time from power on to the full torsion of liquid crystal molecules to the maximum angle, that is, the time from power up to normal signal display, while the falling time is the opposite. Therefore, the response time is actually the overall response time of the whole liquid crystal action. The direct manifestation of LCD with long response time on the screen is that the performance of motion picture is relatively vague, which greatly affects the fun of playing games and watching video discs.


4. Visual angle 

The visual angle of LCD includes horizontal visual angle and vertical visual angle. The horizontal visual angle is represented by the vertical normal of the display (i.e. the vertical imaginary line in the middle of the display) shall prevail. The display image can still be normally seen at a certain angle perpendicular to the left or right of the normal. This angle range is the horizontal viewing angle of the LCD; similarly, if the horizontal normal is taken as the standard, the upper and lower visual angle is called the vertical viewing angle.


5. LCD interface

Selection of LCD interface at present, the mainstream LCD interface in the market is generally the traditional 15 pin D-sub, and some products have both D-sub and DVI interface. From the development trend, the digital LCD interface is the inevitable development direction.


6. Service 

After sales service and brand selection, LCD's advanced circuit structure and highly integrated design make its failure rate significantly improved compared with CRT display, and the repair rate is far lower than the latter. Once the special structure of the CRT display fails, it is not convenient for you to repair the LCD. In general, once the LCD circuit failure, only return to the factory for repair, so its after-sales service is particularly important. In this regard, well-known brands are more trustworthy, and have a three-year free warranty commitment. Do not covet cheap and choose those can not guarantee after-sales service of the miscellaneous brand products.

Types of Smart Locks Tue, 28 Jul 2020 11:43:30 +0200 fifa 19 fifa 19 With the development of science and technology and improvement of people's living standards, more and more people use intelligent locks. What kinds of intelligent locks are there? The following is a brief introduction to the common categories of smart locks and unlocking methods. Junying can provide custom lock parts and accessories produced to the desired specifications according to your requirements, using various machining techniques. 


1. Password unlocking: the intelligent lock mainly uses the password identification method to unlock. In order to facilitate the entrance and exit of the door, family users also adopt the password type door lock. Compared with the traditional key lock, the password lock lock is simpler in application. It does not need to carry the key all day long, and the security is also improved.


2. Bluetooth unlocking: the opening of intelligent lock can use Bluetooth communication to unlock with mobile phone. If the Bluetooth of your mobile phone is normally on, you don't need to take out the mobile phone. The lock will automatically unlock when the lock senses the phone approaching. At this time, you only need to press the lock to unlock.


3. Mobile phone unlocking: at present, many smart locks can be remotely opened and closed or secret keys can be shared through mobile phones. For example, in hotels, the powerful function and platform of wechat can also realize the two-way communication between guests and hotels, which is also very convenient. It is an important means for the hotel to cultivate its members.


4. Fingerprint unlocking: intelligent lock can open the door by fingerprint unlocking. If the fingerprint is successful, it means that it can be put on the unlocking window. The program will sample and input your finger data; when the screen saver is turned on, you just need to place your finger in the scanning area and wait for a short scan comparison. After matching, you can easily untie your finger, and then use your finger to scan in the scanning area again.


5. Swipe card unlocking: the smart locks applied in hotels and offices are generally the most card swiping type. For example, when customers go through the check-in procedures, they will first be given a room card to enter and leave the hotel through the room card; The same is true of enterprises and institutions. On the first day of new employees' employment, they will also handle an employee card. This card is not only a proof of the employee's identity, but also a valid certificate for entering and leaving the company.


6. Biometric door lock: at present, with the continuous development and maturity of life identification technology, the application of biometric door lock has also developed rapidly. Fingerprint recognition and face recognition are common, which are still common in enterprises and institutions. As swipe card lock is easy to cause cheating in attendance, according to the uniqueness of fingerprint and face, it is easier to accurately count employee attendance. Moreover, with the improvement of security needs of home users, this kind of biometric door lock is gradually applied to home users. 


Introduction to types of Raised Floor Round Grommet Tue, 07 Jul 2020 11:18:46 +0200 fifa 19 fifa 19 Common Raised Floor Round Grommet include V-shaped groove, U-shaped groove, R-shaped groove and arc edge. What are V-shaped groove, U-shaped groove, R-shaped groove and arc edge? Europa's small floor braid will tell you.

The part formed by the joint of two floor chamfers is called notch.

V-shaped groove refers to the V-shaped groove formed at the joint from the side;

U-shaped groove is an improved version of V-shaped groove, which is different from V-shaped groove in that the chamfer is not a straight section, but a certain gap is left at the bottom of V-shaped groove;

The R-groove is the arc edge, and the chamfering is pressed into arc shape. The larger arc is called large arc, and the smaller arc is called small arc. In general, notches bring a three-dimensional sense to the floor, making the laminate look more beautiful.

What are the advantages and disadvantages of V-groove, U-groove, R-groove and arc edge?

V-groove is the first generation of notch type, which is simple in technology and can be made of slotting mechanical hardness. There is a bad place is that the bottom of the V-groove is easy to accumulate dust. If it is used for a long time, there will be a "black seam" phenomenon, forming an ugly black edge at the floor notch. At the same time, the chamfered V-groove is not wear-resistant.

U-shaped groove and arc edge need to be pressed by molding equipment. The bottom of U-shaped groove is wider than that of V-shaped groove. It is more convenient to clean, and there will be no black seam. The arc edge not only has the advantages of U-shaped groove, but also looks beautiful, and has good refraction effect on light. We are now using a large arc R-groove, a stronger sense of three-dimensional, better waterproof performance.

What are Differences Between CNC Machining and Conventional Machining Wed, 11 Mar 2020 10:11:06 +0100 fifa 19 fifa 19 As the product of modern technology development, CNC machining has lots of advantages compared to conventional machining and manufacturing. The introduction of machines, tools, materials, surface treatment and more aspects of CNC machining on may be helpful to understand the technique better.

Advantages of CNC Machining over Conventional Machining

1. The numerical control processing technology is relatively complex

When using NC machining technology, it is necessary to fully consider the positioning benchmark, processability and clamping method of parts, as well as the process route, tool selection, process parameters and cutting methods, which can be simplified in traditional machining. Therefore, the NC machining process in the actual use of a lot of complex, affected by many factors, in the process of use, we must carry out scientific and reasonable analysis of NC programming. For the same machining task, when using CNC machining, there can be different process schemes, which is incomparable with the traditional machining process.

2. Tool selection

Because NC machining and traditional machining methods and processes are very different, so the selection of cutting tools is also very different. In the process of NC machining, high-speed cutting is used, while in the traditional machining, speed cutting is used, which has a great advantage. High speed cutting has a great improvement in machining quality and efficiency, small cutting deformation, and improved machining cycle. Compared with traditional machining, NC machining has higher requirements for cutting tools.

3. Selection of clamping and fixture

In NC machining, there are two requirements for the fixture: first, the coordinate direction between the fixture and the machine tool should be fixed; second, coordinate the dimension relationship between the coordinate system of the machine tool and the parts. When selecting the fixture, the CNC machining center should determine the position and installation requirements according to the reference hole and groove of the worktable to ensure the size between the machine coordinate system and the parts, which is one of the important differences with the traditional machine tool machining. There are two main steps in clamping, that is, clamping and positioning. When clamping traditional machine tools, the number of clamping increases due to the limitation of machine tool capacity. When the numerical control machine tool is clamped, it can process multiple surfaces at one time, so that the clamping error is reduced.

4. Processing method

The cantilever boring in traditional machining and the support boring formed by tailstock guide are replaced by the turning boring and different forms of fixed cycle in CNC machine tools. The traditional machining methods, such as air knife method, filling method, trimming method and other technologies, are replaced by various back boring method, arc interpolation method and NC trimming method. At present, as a new processing technology, the new hard cutting can not only improve the working efficiency, but also greatly reduce the cost input, which makes the traditional grinding technology face new challenges. The technology of cutting instead of grinding will be the development trend of modern manufacturing and processing.

Screws Classification and Quality Inspection Method Wed, 25 Sep 2019 12:04:06 +0200 fifa 19 fifa 19 Screws are a common fastener that is widely used in machinery, appliances, and buildings. Screws can be divided into the following types according to their names:

Machine screws, self-tapping screws, wallboard nails, fiberboard nails, wood screws, hexagonal wood screws, non-leaving screws, combination screws, micro screws, furniture screws, electronic screws


According to the head type, they can be divided into :

1. hexagon head 2. hexagon head with flange 3. square head 4. T head (hammerhead) 5. mushroom head(truss head) 6. The head of the neck 7. The round head 8. The pan head 9. The countersunk head (flat head) 10. The semi-sunk head raised countersunk head (oval)


According to the groove type, they can be divided into:

1. One word 2. Inner triangle 3. Inner corner Quartet 4. Cross 5. Rice word 6. Flower shape 7. Plum shape 8. Flower shape 9. Special shape 10. Hexagon. provides a variety of screws applied for different industries, the product will be manufactured according to the customers requirements. 


How to perform quality inspection on screws?

First of all, the screw detection should start from the wire of the screw. The quality of the precision screw is directly related to the wire that produces the screw. The screws that open the good screws and wires are more beautiful. What screw head burst, what thread is not good. Good screw wire will generally not find this situation.


The second is the detection of the head forming of the screw. In the forming of the screw, the mold of the production screw is first detected. Have a good mold to make a good screw product. It is the machine inspection of the production screws, which is conducive to safe and smooth production. The shape of the formed screw is checked to see if there is any burr, and the length of the forming screw is detected. See if these size lengths meet the national standard or the specific requirements of the customer.


The third is the detection of the screw fangs. Of course, the screw is the first to be the tooth plate. Good teeth should be able to pass the stop gauge. Pass the rules and regulations. There is also the detection of the thread pitch of the teeth. It must also meet the national standards for screws or customer requirements.


Finally, the color of the plated screws and the salt spray test are tested. Look at the color of the screws that are plated back. How smooth is the surface of the screw? The salt spray test will detect the rust time of the screw or the number of hours of salt spray screw will rust. After that, the screw shipment was tested. The method is to pick out the unqualified screws. Give the best quality screws to the customer. Guarantee the quality of the screws.

FIFA 19 player ratings Tue, 18 Sep 2018 11:51:58 +0200 fifa 19 fifa 19 FIFA 19 is the one of the series of football simulation game FIFA, which is upcoming and will be put on sale on 28 September. On September 12, FIFA 19 Ratings has been released and we can see top 100 players from the rating, Cristiano Ronaldo and Lionel Messi have both scored 94 and tied for the first place, although this has never happened before. Neymar came in third, while Modric, who led Croatia created wonders of the World Cup, came in fourth.

FIFA 19 Ratings top 1-10 players and scores are as follows:

1. Cristiano Ronaldo (Juventus) – 94

2. Lionel Messi (Barcelona) – 94

3. Neymar (PSG) – 92

4. Luka Modric (Real Madrid) – 91

5. Kevin De Bruyne (Manchester City) – 91

6. Eden Hazard (Chelsea) – 91

7. Sergio Ramos (Real Madrid) – 91

8. Luis Suarez (Barcelona) – 91

9. David De Gea (Manchester United) – 91

10. Toni Kroos (Real Madrid) – 90

The scores of the top 10 players are all over than 90, this group is players rated with the strongest comprehensive strength.

FIFA 19 Ratings top 11-20 players and scores are as follows:

11. Robert Lewandowski (Bayern Munich) – 90

12. Manuel Neuer (Bayern Munich) – 90

13. Diego Godin (Atletico Madrid) – 90

14. Thibaut Courtois (Real Madrid) – 90

15. Jan Oblak (Atletico Madrid) – 90

16. N'Golo Kante (Chelsea) – 89

17. Harry Kane (Tottenham Hotspur) – 89

18. Antoine Griezmann (Atletico Madrid) – 89

19. Giorgio Chiellini (Juventus) – 89

20. Sergio Aguero (Manchester City) – 89

This group also has a strong comprehensive strength and their scores are very close, almost the same, this means the competition is very fierce among the players and the ranking will not be fixed.

The rating helps us to know about the players and games better, the players may know which players to choose in the game. Much other news about FIFA 19 or FIFA coins selling are on, you can give a attention.