The Aqueous Metal Is Calm Application Goose Close

30/mag/2016 02.50.40 rollerbearing Contatta l'autore

Questo comunicato è stato pubblicato più di 1 anno fa. Le informazioni su questa pagina potrebbero non essere attendibili.

 First the aqueous metal is calm application goose close and again the metal is attempt into the Die Casting. The advantage of this adjustment is the cycles/min are increased. But the disadvantage is that top melting point metals and aluminum pick-sup adamant particles.

Die casting machines are usually hydraulically apprenticed and generally positioned horizontally. There are two capital types of die casting machines that are frequently in use, and these are the algid camber blazon and the hot alcove type.

The hot alcove blazon is acclimated for zinc and added lower melting temperature alloys, but is sometimes aswell acclimated for magnesium. When they are in operation, a backlog of aqueous metal is built-in in a boiler and this metal is injected into the die. The bang burden is capricious from 1500 psi to over 4500 psi. ( pounds per aboveboard inch )

Cold alcove die casting is acclimated area hot-chamber can not be used. In this action the aqueous metal is transferred to the injector and again the injector injects the metal into the mold. Metals with top melting credibility can be die casted application this action but the disadvantage is Mechanical Seal is apathetic than hot-chamber process.

blog comments powered by Disqus
Comunicati.net è un servizio offerto da Factotum Srl