Comunicati.net - Comunicati pubblicati - Tecnologia Comunicati.net - Comunicati pubblicati - Tecnologia Thu, 19 Jul 2018 02:24:07 +0200 Zend_Feed_Writer 1.12.20 (http://framework.zend.com) http://comunicati.net/comunicati/aziende/tecnologia/1 SNAITECH E SAFECHARGE INSIEME PER UN'ESPERIENZA DI GIOCO SEMPLICE E SICURA Tue, 17 Jul 2018 11:58:54 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486415.html http://comunicati.net/comunicati/aziende/tecnologia/486415.html Axicom Axicom

 

SNAITECH E SAFECHARGE INSIEME PER UN’ESPERIENZA DI GIOCO SEMPLICE E SICURA


Il recente accordo tra le due società ha introdotto sul mercato Italiano una nuova modalità di deposito e prelievo che consente transazioni più semplici, veloci e sempre più sicure.

 

 

MILANO, 17 luglio 2018 - SNAITECH, il principale operatore Italiano nel settore giochi e scommesse, grazie alla collaborazione con SafeCharge, società leader nelle tecnologie di pagamento, ha completato la migrazione della piattaforma di pagamento verso la soluzione SafeCharge Payments Engine. L’azienda ha scelto SafeCharge per introdurre strumenti di pagamento innovativi e garantire performance migliori e più sicure.

 

 

N.B. in allegato il comunicato completo

 

 

Angela Spiaggi   -   T: +39 02 7526 1125   -   M: +39 3476159013

Follow us on: Twitter& LinkedIn   -   Check out our new website!

 

http://comunicati.net/allegati/205780/02-18 Snaitech e SafeCharge ITA FINAL.docximage007.jpg@01D39F4B.1E960C70

 

AxiCom Italia   -   via Benedetto Marcello 63   -  20124   -   Milano

 

The information in this email is confidential. The contents may not be disclosed or used by anyone other than the addressee.  If you are not the intended recipient, please notify us immediately at the above email address.

 

Please consider the environment before printing this email.

 

]]>
LA NUOVA ETICHETTA ANTITACCHEGGIO DI TYCO RETAIL SOLUTIONS CONSENTE LA LIBERA ESPOSIZIONE DI COSMETICI NEL PUNTO VENDITA Tue, 17 Jul 2018 11:45:38 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486410.html http://comunicati.net/comunicati/aziende/tecnologia/486410.html Axicom Axicom

 

LA NUOVA ETICHETTA ANTITACCHEGGIO DI TYCO RETAIL SOLUTIONS CONSENTE LA LIBERA ESPOSIZIONE DI COSMETICI NEL PUNTO VENDITA

Grazie all’innovativa forma ristretta assicura la protezione di articoli ad alto rischio furto garantendo una shopping experience di qualità

 

Milano, 16 luglio 2018 – Tyco Retail Solutions (www.tycoretailsolutions.com), parte di Johnson Controls, annuncia la nuova etichetta Health, Beauty & Cosmetic (HBC) a marchio Sensormatic, la soluzione antitaccheggio per articoli di cosmesi difficili da proteggere o privi di protezione a causa dei limiti derivanti dalle loro dimensioni o forme. Il profilo sottile e stretto è pensato per proteggere i cosmetici e i prodotti per la cura personale più soggetti ai furti, normalmente di piccole dimensioni e facili da nascondere. L’etichetta HBC a marchio Sensormatic consente di contrastare le nuove opportunità di taccheggio create dal nuovo trend che, grazie alla libera esposizione degli articoli di bellezza nei punti vendita, ha dato prova di favorire un incremento delle vendite.

 

N.B. immagine e comunicato completo in allegato

 

 

 

 

Massimiliano Balbi   •   T: +39 02 7526 1124   •   M: +39 345 29 90 785 

Seguici su:   Twitter   &   LinkedIn   •   Ecco il nostro nuovo sito web!

 

AxiCom signature logo

 

AxiCom Italia   •   Via Benedetto Marcello, 63 – 20124 Milano  

 

The information in this email is confidential. The contents may not be disclosed or used by anyone other than the addressee.  If you are not the intended recipient, please notify us immediately at the above email address.

 

Questo messaggio contiene informazioni riservate. Chiunque lo ricevesse pur non essendone il destinatario è pregato di avvisare al più presto il mittente.

 

Please consider the environment before printing this email.

 

]]>
Nuova violazione di Ammyy.com, sfruttato per distribuire il malware bancario Kasidet Tue, 17 Jul 2018 08:45:21 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486363.html http://comunicati.net/comunicati/aziende/tecnologia/486363.html Elygiuliano Elygiuliano

La Coppa del Mondo FIFA utilizzata come copertura per le comunicazioni tra i cybercriminali

I ricercatori di ESET, il più grande produttore di software per la sicurezza digitale dell'Unione europea, hanno individuato una violazione ai danni di Ammyy Admin, che nella notte tra il 13 e 14 giugno scorsi è stato sfruttato per distribuire una versione del software infettata dal malware bancario Win32 / Kasidet. Per coprire le comunicazioni della loro rete malevola, i cybercriminali hanno sfruttato la Coppa del Mondo FIFA, utilizzando hxxp: // fifa2018start [.] Info / panel / tasks.php come URL del server di comando e controllo.

Kasidet è un bot venduto nel Dark Web ed utilizzato attivamente da vari gruppi di cybercriminali, che nella versione rilevata lo scorso giugno sul sito ammyy.com aveva due obiettivi principali: rubare file contenenti password o dati di accesso per portafogli di criptovaluta e riportare i processi che contengono nel nome alcune stringhe, tra cui bitcoin, kitty, multibit e xshell.

Ammyy.com non è nuovo a questo tipo di violazioni, dato che nell'ottobre 2015 il sito aveva iniziato a distribuire codici pericolosi collegati al gruppo di criminali informatici Buhtrap. I ricercatori di ESET hanno notato molteplici somiglianze con l'attacco di due anni fa: a quel tempo, gli hacker utilizzavano in modo illecito ammyy.com per distribuire numerose famiglie di malware, cambiandole quasi ogni giorno. Nel caso del 2018, i sistemi ESET hanno rilevato solo Win32 / Kasidet, ma la modalità di occultamento della payload è cambiata in tre occasioni, probabilmente per evitare il rilevamento da parte dei software di sicurezza. Un'altra similitudine tra i due incidenti è il nome identico del file che contiene la payload, ovvero Ammyy_Service.exe.

Gli esperti di ESET consigliano a tutte le potenziali vittime di adottare misure precauzionali e utilizzare una soluzione di sicurezza affidabile per verificare e disinfettare i propri dispositivi.

Per ulteriori informazioni sull’argomento visitare il blog di ESET Italia al seguente link: https://blog.eset.it/2018/07/ammyy-admin-di-nuovo-compromesso-da-un-malware-la-coppa-del-mondo-usata-come-copertura/


]]>
Global Amusements Market Is Valued At Around $250 Billion In 2017 According To TBRC’s Latest Report Tue, 17 Jul 2018 08:18:11 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486358.html http://comunicati.net/comunicati/aziende/tecnologia/486358.html tbrc tbrc The Amusements market includes establishments involved in providing facilities for recreation, amusement, and gambling activities, and operating sports teams, clubs, or leagues, involved in playing games for recreational purposes. It includes companies offering participant games and sports facilities. Establishments using transportation equipment to provide recreational and entertainment services are not included in this industry.

Read More: https://www.thebusinessresearchcompany.com/report/amusements-global-market-report-2018

The global amusement market is valued at around $250 billion in 2017. The market is expected to register a high growth during this period. This can be attributed to technological advances, growing popularity of fitness centers, introduction of virtual theme parks and development of a 360-degree technology to offer people a real-life experience of the virtual world are the factors that are expected to boost the market in the forecast period.

Amusements market in the report is segmented into amusement parks and gambling. Gambling was the largest segment in the amusements market making up four-fifths of the market share while the rest was attributed to amusement parks.

Sample Report: https://www.thebusinessresearchcompany.com/sample.aspx?id=26&type=smp

The USA was the largest country in the amusements market in 2017, accounting for two-fifths of the market share, and this was mainly due to a large middle-class population that spends on amusement parks and fitness centers.

The top five competitors in the market made up one sixth of the total market in 2017. The Walt Disney Company Limited was the largest competitor, followed by Las Vegas Sands Corp., Universal Studios, Inc., MGM Resorts International and Merlin Entertainment Group.

About The Business Research Company.

The Business Research Company is a Business Intelligence Company which excels in company, market and consumer research. It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally.

Contact Information.

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email: info@tbrc.info

]]>
Social Services Global Market Is Valued At Around $3 Trillion In 2017 According To TBRC’s Latest Report Tue, 17 Jul 2018 07:45:01 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486354.html http://comunicati.net/comunicati/aziende/tecnologia/486354.html tbrc tbrc Social services are voluntary benefits and facilities related to education, food supplies, education, health care, disaster relief activities and housing services and are offered by private or government establishments to improve living conditions and social welfare and the poor in a community .

Read More: https://www.thebusinessresearchcompany.com/report/social-services-global-market-report-2018

The global social services market is valued at around $ 3 trillion in 2017 due to increasing government funding for developing countries. Also use of technology in child care centers and increasing applications of digital learning platforms are expected to boost the market during the forecast period.

In the report, the global social services market is divided into two segments. Educational services occupy the major share, 62% of the market and the remaining is attributed to the social assistance segment.

Sample Report: https://www.thebusinessresearchcompany.com/sample.aspx?id=314&type=smp

China was the largest country in the social services market in 2017, accounting for one-fifth of the market share. This was a large number of educational institutions, children's day care centers and other social services establishments catering to a large population in the country.

This market is highly fragmented and localized with the top five competitors in the market making up 0.8% of the total market in 2017. Large proportion is included within state budgets. Bill & Melinda Gates Foundation was the largest competitor of the market, followed by the World Food Program and UNICEF. The Gates Foundation is a private foundation founded by Bill and Melinda Gates in 2000. In developing countries, it focuses on improving people's health and eradicate hunger and poverty.

About The Business Research Company.

The Business Research Company is a Business Intelligence Company, which excels into the company, market and consumer research . It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally .

Contact Information .

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email : info @ tbrc . info

 

]]>
The Global Converted Paper Product Manufacturing Market Is Valued At $486 Billion In 2017 According To TBRC’s Latest Report Tue, 17 Jul 2018 07:18:26 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486348.html http://comunicati.net/comunicati/aziende/tecnologia/486348.html The Business Research Company The Business Research Company The converted paper product manufacturing market includes companies that manufacture and market converted paper by from other paper and paper board products. The converted paper products include paperboard and corrugated boxes, paper bags, stationery, sanitary paper products, and other products (crepe paper, die-cut paper for non-office use, and moulded pulp products).

Read the report at

https://www.thebusinessresearchcompany.com/report/converted-paper-products-manufacturing-global-market-report-2018

The converted paper manufacturing market is valued at $486 billion in 2017 due to the new developments in packaging like resalable packs, easy-opening, and stand-up pouches. Asia Pacific was the largest region in the market in 2017, accounting for nearly half of the market share.

The converted paper product manufacturing market in the business research company’s report is divided into five segments. Paperboard container manufacturing was the largest segment with more than half of the market share. Paper bag and coated and treated paper manufacturing was the second largest segment with more than one sixth share of the market. It was followed by sanitary paper & stationery product manufacturing, both with more than one-fifth share of the market combined. The remaining, all other converted paper product manufacturing take up around five percent of the market share respectively.

Download a sample of the report at

https://www.thebusinessresearchcompany.com/sample.aspx?id=49&type=smp

China was the largest country in the converted paper product manufacturing market in 2017, accounting for one-fourth of the market share. This is due to increase in demand for folding paperboard box, solid fiber box and corrugated box from the packaging, retail and e-commerce markets in the country. China was followed by the USA and Japan.

The top five competitors of the market are Georgia-Pacific Corporation, International Paper Company, Kimberly Clark Corporation, Tetra Laval Group, and Svenska Cellulosa Aktiebolaget. Georgia-Pacific was the biggest player in the market in 2017. The company engages in the manufacturing and marketing of tissue, pulp, paper, packaging, and building products, and related chemicals. Georgia-Pacific was founded in 1927 and is headquartered in Atlanta, Georgia, US.

About The Business Research Company.

The Business Research Company is a Business Intelligence Company which excels in company, market and consumer research. It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally.

Contact Information.

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email: info@tbrc.info

]]>
The Global Apparel Manufacturing Market Is Valued At Over $795 Billion In 2017 According To TBRC’s Latest Report Tue, 17 Jul 2018 07:18:06 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486347.html http://comunicati.net/comunicati/aziende/tecnologia/486347.html The Business Research Company The Business Research Company Apparel Manufacturing establishments are engaged in the manufacturing of hosiery, socks, knitting of fabric, cutting and sewing of apparel and accessories and their sale.

Read the report at

https://www.thebusinessresearchcompany.com/report/apparel-manufacturing-global-market-report-2018

 

The market is valued at more than $795 billion in 2017 due to the high demand from the developing countries.

In the report, the global apparel manufacturing market is divided into three segments. More than half of the market is occupied by the women’s wear whereas, around two-fifth is occupied by the men’s wear and the remaining market share is occupied by the kids wear.

Download a sample of the report at

https://www.thebusinessresearchcompany.com/sample.aspx?id=45&type=smp

China was the largest country in the apparel manufacturing market in 2017, accounting for nearly one-fifth of the market share. This can be attributed to a high demand for men and women wear fueled by a large middle-class population. The USA and the UK followed China as the next largest countries in the market.

The apparel manufacturing market is fragmented with a number of large and small organizations. The top five competitors in the market made up 9% of the total market share in 2017. Christian Dior SE was the largest competitor of the market, followed by H&M AB, VF Corp, NIKE Inc. and Adidas AG. Christian Dior SE is a holding company engaged in the production, distribution, and retail of fashion accessories and beauty products. The company operates retail stores under the names Le Bon Marché, DFS Galleria, Sephora, Ile de Beauté and Ole Henriksen.

About The Business Research Company.

The Business Research Company is a Business Intelligence Company which excels in company, market and consumer research. It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally.

Contact Information.

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email: info@tbrc.info

 

]]>
The Apparel And Leather Products Manufacturing Market Valued At Over $1 Trillion In 2017 According To TBRC’s Latest Report Tue, 17 Jul 2018 07:17:43 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486346.html http://comunicati.net/comunicati/aziende/tecnologia/486346.html The Business Research Company The Business Research Company The apparel and leather products market comprises establishments involved in the manufacture and sale of apparel, leather and related products.

Read the report at

https://www.thebusinessresearchcompany.com/report/apparel-and-leather-products-global-market-report-2018

The apparel and leather product manufacturing market is valued at over $1trillion in 2017 because the industry is adopting robotics and automation technologies which has enabled the textile manufacturers to produce at a lower cost.

The apparel and leather products is segmented into apparel manufacturing and leather and allied products. Apparel manufacturing was the largest segment in the apparel and leather products market with a 60% share of the market. Leather and allied products was the second largest segment in the apparel and leather products market with a 40% share of the market.

Download a sample of the report at

https://www.thebusinessresearchcompany.com/sample.aspx?id=38&type=smp

The USA was the largest country in the apparel and leather products market in 2017, accounting for almost one-fifth of the global market share, followed by China and Japan as the next largest countries in the market.

The top five competitors in the market made up nearly 9% of the total market in 2017. NIKE Inc. was the largest competitor, followed by Christian Dior SE, H&M AB, Adidas AG and VF Corp. Nike, Inc. is an American multinational corporation that is engaged in the design, development, manufacturing, and worldwide marketing and sales of footwear, apparel, equipment, accessories, and services. The company is headquartered near Beaverton, Oregon, US. It is the world's largest supplier of athletic shoes and apparel and a major manufacturer of sports equipment.

About the Business Research Company.

The Business Research Company is a Business Intelligence Company which excels in company, market and consumer research. It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally.

Contact Information.

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email: info@tbrc.info

]]>
Global Social Assistance Market Is Valued At Around $1Trillion In 2017 According To TBRC’s Latest Report Tue, 17 Jul 2018 07:13:18 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486344.html http://comunicati.net/comunicati/aziende/tecnologia/486344.html tbrc tbrc  

The social assistance industry includes facilities that provide a wide range of social assistance services to their clients. It includes child care services, community food and relief services, and individual and family services. These services do not include residential or accommodation services, except on a short-day basis.

Read More: https://www.thebusinessresearchcompany.com/report/social-assistance-global-market-report-2018 

The global social assistance market is valued at around $ 1 Trillion In 2017, it is an increase in the number of women employees and tsunami, government funding in developing countries and utilization of digital technologies in day care centers 

The market in the report is segmented into: community and individual services and child day care services.

Sample Report: https://www.thebusinessresearchcompany.com/sample.aspx?id=12&type=smp

China was the largest country in the social assistance market in 2017, accounting for one-fifth of the market share. Providing child care services and community and individual services in the country. China was followed by the USA and India.

The top five competitors in the market made up around 2% of the total market in 2017. Bill & Melinda Gates Foundation was the largest competitor, followed by the World Food Program, UNICEF, The Salvation Army and Feeding America. Bill & Melinda Gates Foundation was the largest organization in the social assistance market in 2017, with 0.51% share of the market. The Gates Foundation is a private foundation founded by Bill and Melinda Gates in 2000. In developing countries, it focuses on improving people's health and eradicate hunger and poverty.

About The Business Research Company.

The Business Research Company is a Business Intelligence Company, which excels into the company, market and consumer research. It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally.

Contact Information.

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email: info@tbrc.info

 

]]>
1. Conferenza europea BACnet® Airport Mon, 16 Jul 2018 13:43:01 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486281.html http://comunicati.net/comunicati/aziende/tecnologia/486281.html TEMA Technologie Martketing AG TEMA Technologie Martketing AG

 

 

 

 

 

 

 

Dal 27 al 28 settembre all’aeroporto di Francoforte incontro del management tecnico d’aeroporto

 

Dortmund, Luglio 2018. – Dal 27 al 28 settembre all’aeroporto di Francoforte si incontrano i Facility Manager e i gestori degli aeroporti europei in occasione della prima BACnet Airport Conference. L’obiettivo di questa conferenza sarà lo scambio di esperienze tecniche e strategiche in riguardo ad un’automazione indipendente d’edificio. Con una quota di mercato globale del 64% lo standard comunicativo BACnet (ISO 16484-5) riveste sempre più un ruolo chiave nella gestione degli aeroporti all’avanguardia.

 

La BACnet Airport Conference si svolge all’insegna della gestione d’edificio affidabile. “Con BACnet siamo riusciti a realizzare un sistema di automazione d’edificio competitivo,“ dice Rüdiger Schröder del management infrastrutturale centrale di Fraport AG. “La comunicazione dati uniforme è una tecnologia chiave, che offre un sostegno importante a tutti i processi di realizzazione, dalla pianificazione attraverso la costruzione alla gestione.“

 

All’interno degli aeroporti europei BACnet viene considerato come base indispensabile per garantire la sicurezza d’investimento e la gestione d’edificio affidabile. La Fraport AG costruisce il suo nuovo Terminal 3 con un sistema di automazione d’edificio basato sulla comunicazione BACnet.

 

Sicurezza, confort ed efficienza energetica negli aeroporti

 

La BACnet Airport Conference ha luogo all’aeroporto di Francoforte a Gateway Gardens, una delle più grandi “Airport Cities” europee in espansione. La conferenza sarà affiancata da un’esposizione che mostrerà le nuove soluzioni riguardanti l’attrezzatura tecnica d’edificio e i nuovi servizi.

 

Beckhoff, GEZE e Siemens presenteranno le loro prestazioni nel settore della sicurezza, del confort e dell’efficienza energetica come sponsor “First Class“ in ambito dell’esposizione e del programma della conferenza. Ulteriori sponsor che coglieranno l’occasione di una comunicazione “Elevator Pitch“ sono gli sponsor “Business Class“- ABB, Belimo, Danfoss, Hermos, Loytec, MeteoViva, Reliable Controls, Sauter e TÜV Süd. Adiutec e Kieback&Peter invece saranno presenti come sponsor Logo.

 

Il comitato organizzatore della Airport Conference è il gruppo indipendente BACnet Interest Group Europe (BIG-EU). Tutte le informazioni relative al programma e alle possibilità di partecipazione e di sponsorizzazione sono disponibili sul sito Internet https://airportconference.org.

 

IL BIG-EU

 

Il BACnet Interest Group Europe (BIG-EU) promuove l’applicazione del protocollo di comunicazione mondiale BACnet ISO 16484-5 nella Building Automation ed ingegneria di sicurezza in Europa. È stato fondato nel 1998 da 18 società di settori attinenti alla Building Automation. Oggi ha oltre 130 membri in Australia, Belgio, Danimarca, Germania, Inghilterra, Finlandia, Francia, Irlanda, Italia, Canada, nei Paesi Bassi, in Norvegia, Austria, Polonia, Svezia, Spagna, Svizzera, Turchia, nella Repubblica Ceca e negli USA. Gli obiettivi del BIG-EU sono, in primo luogo, la percezione degli interessi europei nello sviluppo dello standard BACnet e lo scambio di informazioni con il comitato ASHRAE competente per BACnet "SSPC 135" e la comunità americana BACnet, e il secondo marketing congiunto, un'offerta di qualificazione e lo sviluppo comune di linee guida tecniche. Ulteriori informazioni su www.big-eu.org.

]]>
IMTS 2018 è la più grande raccolta di risorse dell’industria per la produzione di additivi Mon, 16 Jul 2018 11:25:18 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486257.html http://comunicati.net/comunicati/aziende/tecnologia/486257.html TEMA Technologie Martketing AG TEMA Technologie Martketing AG McLean, Virginia, (luglio 2018): provare ad analizzare lo stato della tecnologia della produzione di additivi, Additive Manufacturing (AM), potrebbe sembrare di provare a comporre un puzzle mentre i pezzi vengono preparati. Ogni giocatore in questo campo in rapida evoluzione presenta un pezzo del puzzle, e gli utenti potenziali ed attuali hanno domande che vanno dal semplice, come scegliere un materiale, fino a quanto avanzato, come attribuire con precisione le proprietà a livello molecolare.

 "Per ottenere una vera conoscenza di ciò che è possibile oggi e in futuro, IMTS 2018 - The International Manufacturing Technology Show, offre una concentrazione senza precedenti di risorse per la produzione additiva", afferma Peter R. Eelman, Vicepresidente - Exhibitions & Business Development presso AMT - Association For Manufacturing Technology, che possiede e produce IMTS. "In un tempo così breve, la storia di IMTS è diventata sinonimo di innovazione tecnologica dell’AM." A IMTS 2018, Eelman prevede che uno degli argomenti di discussione più caldi di AM sarà come estendere la digitalizzazione dalla progettazione all'elaborazione fino alla parte finale.

Dal 10 al 15 settembre presso il McCormick Place di Chicago, le risorse dell’AM di IMTS includono il Padiglione dell’Additive Manufacturing e un secondo AMT’s Emerging Technology Center incentrato strettamente sulla produzione additiva, entrambi situati all'ingresso del West Building in uno spazio espositivo ampliato. Il padiglione AM vanta ora 56 espositori, rispetto ai 21 di due anni fa, oltre a numerosi espositori in altri padiglioni che presenteranno tecnologie relative agli additivi.

Già da anni IMTS ospita la conferenza sulla produzione additiva presentata da Gardner Business Media l'11 e 12 settembre e il simposio AppliedAM - Where Additive Minds Meet presentato da EOS North America il 12 settembre. Inoltre, almeno sei delle sessioni tecniche presentate come parte della conferenza IMTS si concentrerà sulla tecnologia AM (vedi elenco sessioni).

"L'IMTS è molto utile per qualsiasi azienda che vuole rimanere competitiva", afferma Glynn Fletcher, Presidente di EOS North America. "Passare alla produzione con la produzione additiva è una nuova esperienza per tutti. Ecco perché portiamo un grande team di esperti che conoscono la tecnologia e le attrezzature, dagli ingegneri ai tecnici del servizio. Non c'è altro posto dove potete incontrare così tanti esperti contemporaneamente. È un’esperienza davvero unica."

Il tema dell'esposizione IMTS 2018 di EOS è un "miglio aggiuntivo" che porta i visitatori attraverso le fasi progressive di un viaggio nella produzione additiva: prototipazione, ricerca di opzioni materiali, selezione e ottimizzazione della progettazione, scalabilità, produzione, integrazione in una struttura e servizio e aggiornamenti in corso.

Conoscere le nuove tendenze

"La produzione additiva riguarda la risoluzione del problema della produzione a basso costo e ad alto volume", afferma Ed Israel, Presidente e co-fondatore di Plural Additive Manufacturing. "C'è stato un enorme vuoto nel mercato per le aziende che non potevano permettersi la tecnologia, ma trarrebbero vantaggio dalla produzione di buoni prototipi e pezzi di serie con la stampa 3D. IMTS 2018 è il posto migliore per conoscerla."

Israel dice che pensa a Plural come integratore di produzione additiva che lavora con i clienti per aiutarli con qualsiasi aspetto di AM, dal design delle parti fino alla produzione di pezzi in grande quantità. Per aiutare le persone a trovare i modi giusti per applicare AM, sia all'interno di un assemblaggio esistente o per lo sviluppo di nuovi prodotti, Plural ha sviluppato un calcolatore costo per pezzo.

 "Il grande tema che guiderà la produzione additiva sta portando il costo per parte al punto in cui può aprire nuovi mercati, migliorare i margini o raggiungere altri obiettivi aziendali", ritiene Israel. "Possiamo aiutare le aziende a determinare se l'additivo ha valore prima di investire in esso."

 Glenn Redding, Director of Engineering per ESAB Welding & Cutting Products, è d'accordo, affermando che "la produzione additiva può essere studiata ed esplorata per applicazioni e punti di sofferenza unici per i produttori che si occupano di parti ad alto mix / basso volume e che guidano per migliorare efficienze operative. " Osserva che AM potrebbe aiutare i produttori a fornire risorse aggiuntive per gestire richieste speciali da parte dei clienti, a reagire più rapidamente eliminando la necessità di produrre utensili e farlo senza interrompere la capacità di produzione primaria. In effetti, molti ritengono che il segmento in più rapida crescita dell’AM, sia a base polimerica sia a base metallica, oggi stia creando dispositivi, attrezzature e altri strumenti che riducono i costi e il time-to-market.

 "Quando la gente vede come la produzione additiva si adatta alle operazioni correnti e capisce la relazione simbiotica tra le tecnologie additive e sottrattive, questo dà loro la sicurezza di andare avanti", afferma Eelman.

Ted Toth, consulente tecnico senior a Rosenberger North America, ha frequentato ogni singolo IMTS dal 1974. Dice che "dal punto di vista del lavoro, lo potete vedere come una minaccia o un'opportunità. I negozi di lavoro devono abbracciare e comprendere i processi additivi in modo che possano supportare la lavorazione post-processo di prodotti additivi metallici. "

Tendenze nel tooling

"Le persone stanno iniziando a vedere che possono stampare i propri strumenti molto rapidamente e sul posto, e quindi aumentare l'innovazione e ridurre il tempo complessivo del ciclo per sviluppare quel prossimo grande prodotto", afferma Bill Peter, Direttore del Manufacturing Demonstration Facility (MDF) presso Oak Ridge National Laboratory (ORNL), collaboratore di lunga data di IMTS per la creazione di dimostrazioni per l’Emerging Technology Center.

Peter osserva che gli Stati Uniti hanno perso circa il 37% del settore degli stampi e degli utensili in meno di un decennio e attualmente stanno importando dal 70 all'80% dei loro utensili. Avendo dimostrato il successo con gli stampi polimerici, l'MDF sta ora esaminando come procedere con la stampa 3D in metallo." Vogliamo esaminare le quantità del materiale di partenza economicamente conveniente e aumentare il tasso di deposizione di sistemi additivi che potrebbero produrre strumenti", afferma, sottolineando che gli strumenti influiscono notevolmente sui tempi di consegna e sul costo e sul tasso di innovazione.

Esattamente a tale scopo, Vader Systems dimostrerà la sua tecnologia Magnet-o-Jet ™ per fondere e "spruzzare" un filo continuo di alluminio (ad esempio, senza polvere) per creare parti metalliche. Vader ha una partnership con il Rochester Institute of Technology, che sta aiutando a sviluppare congiuntamente tecnologia e nuovi materiali, come i tipi di alluminio aerospaziale che sono tradizionalmente non saldabili e difficili da stampare con altri processi AM.

"Non posso sopravvalutare il tasso di crescita della tecnologia AM", afferma Jennifer Moran, direttore vendite e marketing di Vader Systems e quattro volte partecipante all'IMTS. All'IMTS 2014, molte persone non capivano i concetti di base dell'AM. Ora, le persone capiscono le sfumature nella tecnologia e vogliono discutere delle applicazioni e dei materiali specifici. Portiamo l'intero team di Vader, dai dirigenti di livello C agli ingegneri meccanici, così le persone che hanno diversi livelli di interesse, dal tecnico al finanziario, possono ottenere risposte e andare avanti".


Software per la produzione additiva

Rapidissimamente l'industria è passata dall'utilizzo dell’AM per la prototipazione, alla costruzione di maschere e proiettori, alla produzione in serie di parti finali. È un percorso consigliato per l'adozione della tecnologia, in quanto aiuta le aziende a familiarizzare con incrementi ragionevoli. Man mano che le aziende vanno avanti, tuttavia, devono investire in software specifici per l’AM.

"Originariamente, macchine, materiali e software CAD / CAM sono stati realizzati per la prototipazione. Ora abbiamo bisogno di strumenti più robusti per produrre parti utili e ripetibili ", afferma Duann Scott Business Development & Strategy, Additive per Autodesk. Scott spiega che AM è un termine generico per molte diverse tecnologie e ogni tecnologia ha i suoi tipici problemi da risolvere.

"Con il nostro software di produzione additiva Nebfabb®, possiamo semplificare il flusso di lavoro dalla progettazione e ottimizzazione, preparazione e simulazione e quindi l'elaborazione", afferma Scott.
Uno dei problemi a cui molti utenti di AM si confrontano è che non capiscono cosa succede durante il processo di generazione e questo fa perdere più tempo per tentativi ed errori.
"Quello che stiamo vedendo nella stampa di metalli è che c'è molta distorsione termica nelle parti dall'energia diretta alla polvere", dice Scott.
"Il software Autodesk può simulare il processo di costruzione e cercare distorsioni, compensare e creare stampe di successo per quelle parti."

Invece, Doug Dingus, Direttore del servizio di Plural, che ha più di 20 anni di esperienza nel CAD e nel software correlato, quest'anno parteciperà per la prima volta a IMTS.

"Saltare nella scena della produzione additiva mi sembra molto simile al CAD negli anni '90", ha affermato. "Se guardiamo indietro alla modellazione solida e al modo in cui sono cambiate così tante industrie, sembra essere uguale. AM è al culmine di una grande esplosione. Penso che l'IMTS sia il posto dove andare, perché è lì che si incontrano tutti i protagonisti del settore."

Con tutte le possibilità a IMTS 2018, "credo che il modo migliore per raggiungere i propri obiettivi sia quello di avere un piano per visitare lo show", afferma Jeff Holtzapple, Business Development Manager, Additive Manufacturing, Morris Group, che rappresenta Desktop Metal e altri produttori. "Penso che se utilizzate MyShow Planner e fate degli appuntamenti con gli espositori, passerete un tempo più efficace all’IMTS."

]]>
Atmospheric Water Generator Market Analysis, Growth Rate and Forecasts, 2016 to 2024 Mon, 16 Jul 2018 10:43:56 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486247.html http://comunicati.net/comunicati/aziende/tecnologia/486247.html susan hill susan hill The global Atmospheric Water Generator (AWG) Market is expected to witness growth at a CAGR of over 20% in the forecast period (2016 to 2024). Rising demand for these products across large-scale industries; like oil & gas, steel, and paper should positively impact the industry. Moreover, technological improvements giving high water output also generate more sales.

Declining availability of fresh water resources along with higher infrastructural expenses are said to drive the industry. Prices of machines from different manufacturers vary depending on applications, product efficiency, and quality. Most market products need ample electricity which could be impossible at some places, restraining the growth of this market.

However, technological advancements in AWG products to provide on-board power supply; for example, solar panels can positively influence the industry during the next eight years. Also, several dealers in the supply chain may pose industry challenge, resulting in unwanted hold-ups through manufacturing. Hence, the incorporation of AWGs across the value chain would be the key to market sustenance from 2016 to 2024.

Browse Details of Report @ https://www.hexaresearch.com/research-report/atmospheric-water-generator-market

However, high costs of industry products, along with high energy consumption, limit further penetration, especially in residential applications. Manufacturers will come up with innovative technologies and production methods to lower the overall costs of products to gain attention from residential & commercial users. The atmospheric water generator market is categorized into products, applications, and regions.

Products comprise cooling condensation and wet desiccation. Cooling condensation AWGs are the most commonly utilized. These generators occupied over 95 % of the total shares in 2015. Various technological developments related to lower power consumption & costs are projected to augment segment growth till 2024.

Lack of customer awareness about wet desiccation products coupled with their complex mechanism should restrict their growth. However, substitution of crystalline brine salts with liquid brine to enhance air moisture extraction is likely to boost the demand for wet desiccation AWGs in the eight years ahead.

Applications include residential, industrial, and commercial. Residential led the market in the past and is said to continue likewise during 2016 to 2024. Demand for AWGs from this segment should grow at a CAGR of over 14 % over the forecast period. Commercial applications are estimated to grow at the highest rate of over 19 % in the near future. Industrial will observe substantial expansion.

Regions in the worldwide atmospheric water generator market are Latin America, Asia Pacific, Europe, North America, and the Middle East & Africa. Demand in MEA is projected to grow at a CAGR of 18 % till 2024. Its awareness regarding AWG benefits can drive the regional industry. India and China may experience high gains on account of their rising urbanization and changing lifestyles.

Moreover, higher prevalence of water scarcity and unusual rainfalls in India would propel the demand for ideal water production alternatives. This is forecast to positively influence the Indian market. The huge need for power supply for AWGs renders it impractical for usage across few geographical regions. Some of the eminent players in the global market encompass Fujian Yuxin Electronic Co. Ltd.; Watair Inc.; Ambient Water Corp.; and Technocom Pvt. Ltd.

Browse Related Category Market Reports @ https://www.hexaresearch.com/research-category/next-generation-technologies-industry

About Us:

Hexa Research is a market research and consulting organization, offering industry reports, custom research and consulting services to a host of key industries across the globe. We offer comprehensive business intelligence in the form of industry reports which help our clients obtain clarity about their business environment and enable them to undertake strategic growth initiatives.

Contact Us:

Ryan Shaw

Hexa Research

Felton Office Plaza

6265 Highway 9

Felton, California 95018

United States

Phone: +1-800-489-3075

Email: sales@hexaresearch.com

Website - https://www.hexaresearch.com/

]]>
Global Educational Services Market Is Valued At Around $2 Trillion in 2017 According To TBRC’s Latest Report Mon, 16 Jul 2018 08:56:13 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486230.html http://comunicati.net/comunicati/aziende/tecnologia/486230.html tbrc tbrc  

The educational services market includes establishments providing training and instruction in a wide variety of subjects. The instruction and training is provided in schools, colleges, universities, and training centers.

Read More: https://www.thebusinessresearchcompany.com/report/educational-services-global-market-report-2018 

The global educational services market is valued at around $ 2 trillion in 2017 two to increase in demand for IT, business management, and engineering courses, growing demand for educated workforce in developing countries, increasing applications of big data analytics and digital learning platforms are expected to boost the market during the forecast period.

In the report, the global educational services market is divided into three segments. Elementary and secondary schools occupied by the other two segments, namely, colleges, universities, and professional schools and other education services.

Sample Report: https://www.thebusinessresearchcompany.com/sample.aspx?id=13&type=smp

China was the largest country in the educational services market in 2017, accounting for one-fifth of the market share. This was mainly due to the presence of a large number of educational institutions offering elementary and secondary colleges, universities and professional school education. The USA and India are the next largest countries in the market.

The top five competitors made up 0.5% of the total market in 2017. University of California System was the largest competitor of the market, followed by Texas A & M University, University of Michigan, Columbia University and Harvard University. The University of California is located in Oakland, California, with more than 238,000 student enrollments. The University owns ten campuses located in Berkeley, Davis, Irvine, Los Angeles, Merced, Riverside, San Diego, San Francisco, Santa Barbara, and Santa Cruz. These campuses offer undergraduate, graduate, and professional education. 

About The Business Research Company.

The Business Research Company is a Business Intelligence Company, which excels into the company, market and consumer research . It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally .

Contact Information .

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email : info @ tbrc . info

 

]]>
The Aircraft Manufacturing Global Market Was Valued At $402 Billion In 2017 According To TBRC’s Latest Report Mon, 16 Jul 2018 08:54:15 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486229.html http://comunicati.net/comunicati/aziende/tecnologia/486229.html The Business Research Company The Business Research Company Aircraft Manufacturing consists of companies involved in developing prototypes and manufacturing or assembling of complete aircraft and making aircraft. These include manufacturing of blimps, gliders, helicopters, target drones, ultra-light aircraft and unmanned and robotic aircrafts.

Read the report at:

https://www.thebusinessresearchcompany.com/report/aircraft-manufacturing-global-market-report-2018

The market was valued at $402 billion in 2017 due to high demand for commercial aircrafts from air travels across the world especially developing countries. Additionally, demand for military aircrafts due to rising geopolitical tensions is further supporting the market.

The aircraft manufacturing market is split into four segments: civil and military helicopters; civil and military aircrafts; civil and military gliders; civil and military drones.

Download a sample of the report at

https://www.thebusinessresearchcompany.com/sample.aspx?id=143&type=smp

The USA was the largest player in aircraft manufacturing market in 2017, accounting for more than one-fourth of the market, followed by China.

The top five competitors in the market are The Boeing Company, Airbus Group, Lockheed Martin Corp., BAE Systems PLC and Bombardier Inc. The Boeing Company was the largest competitor. It was founded in 1916 and is headquartered in Chicago, USA. The company is involved in designing, developing, manufacturing, selling, and servicing of commercial jetliners, military aircraft, satellites, missile defense, human space flight, and launch systems and services.

About The Business Research Company.

The Business Research Company is a Business Intelligence Company which excels in company, market and consumer research. It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally.

Contact Information.

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email: info@tbrc.info

 

]]>
The Global Aircraft Parts Manufacturing, Repair And Maintenance Market Was Valued At $300 Billion In 2017 According To TBRC’s Latest Report Mon, 16 Jul 2018 08:53:40 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486228.html http://comunicati.net/comunicati/aziende/tecnologia/486228.html The Business Research Company The Business Research Company Aircraft parts manufacturing, repair & maintenance industry includes establishments involved in developing prototypes and manufacturing aircraft engine and engine parts, other aircraft parts, auxiliary equipment, modifications or conversions and complete overhauling and rebuilding of aircraft.

Read the report at:

https://www.thebusinessresearchcompany.com/report/aircraft-parts-manufacturing-repair-and-maintenance-global-market-report-2018

The market was valued $300 billion in 2017 due high level of maintenance and high standards of checks required in aircraft. Additionally, demand for repair and maintenance for ageing aircraft carriers is further supporting the market.

The aircraft parts manufacturing, repair and maintenance market is split into four segments: maintenance, repair, & overhaul, engine & engine parts, and other aircraft parts.

Download a sample of the report at

https://www.thebusinessresearchcompany.com/sample.aspx?id=144&type=smp

North America was the largest region in the aircraft parts manufacturing, repair and maintenance market in 2017, accounting for more than 40% market share.

The USA was the largest country in the market in 2017, accounting for more than one-fifth of the market. The USA was followed by China as the next largest country in the market.

The top five competitors in the market are United Technologies Corp., General Electric Company, The Boeing Company, Safran S.A. and Airbus Group. United Technologies Corporation was the largest competitor. It provides high technology products and services to the building systems and aerospace industries worldwide. The company was established in 1934 and employs around 201,600 people across the world.

About The Business Research Company.

The Business Research Company is a Business Intelligence Company which excels in company, market and consumer research. It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally.

Contact Information.

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email: info@tbrc.info

 

]]>
The Global Communications Hardware Market Is Valued At $692 Billion In 2017 According To TBRC’s Latest Report Mon, 16 Jul 2018 08:52:39 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486227.html http://comunicati.net/comunicati/aziende/tecnologia/486227.html The Business Research Company The Business Research Company Businesses in the communications hardware industry manufacture telephone apparatus and broadcasting and wireless communications hardware. It includes wired and wireless communication hardware equipment. Communications hardware is the hardware used for telecommunications.

Read the report at:

https://www.thebusinessresearchcompany.com/report/communications-hardware-global-market-report-2018

The market is valued at $692 billion in 2017 due to economic growth, increasing smart cities, government initiatives and internet of things.

The communications hardware market in The Business Research Company’s report is segmented into three segments, namely general communication equipment, broadcast communications equipment and telecom infrastructure equipment. While the first segment accounts for more than half of the market share, the remaining share is attributed to the other two segments.

Download the sample of the report at

https://www.thebusinessresearchcompany.com/sample.aspx?id=280&type=smp

China was the largest country in the communications hardware market in 2017, accounting for more than three-fifth of the market share. China was followed by the USA and Japan as the next largest countries in the market.

Apple was the largest company in the communications hardware market, followed by Samsung and Cisco Systems. Apple Inc was established in 1976 and is headquartered in California, USA. Its products and services include phones, tablets, music players, laptops, desktops and TVs. Its consumer and professional software applications include the IOS and OS X operating systems, iCloud, and accessories, service and support offerings. The company also has iTunes Store, App Store, iBook Store, and Mac App Store through which it sells its digital content and applications.

About The Business Research Company.

The Business Research Company is a Business Intelligence Company which excels in company, market and consumer research. It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally.

Contact Information.

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email: info@tbrc.info

 

]]>
Soluzione CAD 2D e 3D per specifiche esigenze di nicchia Fri, 13 Jul 2018 10:46:16 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486093.html http://comunicati.net/comunicati/aziende/tecnologia/486093.html gtebart gtebart Milano, Italia – 13 Luglio 2018: Le numerose nicchie e settori industriali, non permettono sempre di trovare il giusto strumento CAD 2D o 3D. Ma ci sono modi per ottenere il risultato desiderato attraverso l’utilizzo di strumenti CAD ad un costo corretto.
Soluzioni CAD specifiche per singole nicchie
Soluzioni specifiche per singole nicchie
Molte PMI hanno successo perché operano in una nicchia nel loro settore. Ciò consente loro di essere uno dei principali fornitori nel loro mercato e di mantenere basso il numero dei concorrenti. In altre aree, questa strategia comporta sfide che l'azienda deve affrontare quotidianamente. Le aziende cercano un software CAD, che spesso richiede funzioni specifiche che non sono offerte come standard sul mercato.

Soluzioni industriali ad alto valore aggiunto
Tutti sono alla ricerca di modi per rendere più snelli i processi. Per questo motivo i fornitori che operano in specifiche nicchie implementano le funzioni dei loro software per rendere automatici i processi di progettazione. Queste modifiche al software vengono spesso realizzate internamente senza sfruttare a pieno le potenzialità dei pacchetti CAD. I produttori di software o i loro partner certificati sono spesso in grado di consigliare e realizzare personalizzazioni avanzate che risolvono problemi e possono automatizzare operazioni ripetitive.

Soluzione automatizzata per la costruzione di condotti
La stesura dei condotti fa parte di una delle nicchie più piccole in cui i profitti possono già essere realizzati attraverso piccole automazioni. Le tubazioni sono pianificate con precisione in base alle coordinate GPS e le tubazioni vengono piegate e installate con precisione. Per questo processo costruttivo può essere adottata una soluzione CAD capace di automatizzare i singoli processi.

Ottimizzare i processi con un configuratore online
La connessione a un configuratore online è già una realtà per diversi utenti MEDUSA4. Alcuni di loro hanno ottimizzato il processo di vendita nella loro azienda e l'hanno reso indipendente dalla progettazione. Utilizzando i moduli on-line, ogni addetto alle vendite crea la propria offerta con pochi clic, inclusa tutta la documentazione CAD.

Una soluzione per tutti i requisiti
MEDUSA4 è una soluzione CAD 2D / 3D in grado di gestire tutte le richieste nel mondo della progettazione. L'architettura flessibile e personalizzabile del software consente di implementare rapidamente funzioni molto specializzate. L'integrazione con sistemi di terze parti può essere inoltre completamente automatizzata.

Soprattutto con il CAD 2D, il software non può essere standard ma, si deve adattare a specifiche esigenze industriali del cliente.

Incredibile, quello che si può fare con un software CAD
https://www.cad-schroer.it/novita/soluzione-cad-2d-e-3d-per-specifiche-esigenze-di-nicchia?utm_source=pressemitteilung&utm_medium=portal&utm_campaign=20180711_Medusa-Individual

Inerente a CAD Schroer
Specializzata nello sviluppo di software e nella fornitura di soluzioni engineering, CAD Schroer è un'azienda di calibro mondiale che aiuta ad accrescere la produttività e la competitività dei clienti specializzati nei settori della produzione e della progettazione di impianti, inclusi il settore automobilistico e il suo indotto, il settore energetico e i servizi pubblici. CAD Schroer ha uffici e filiali indipendenti in Europa e negli Stati Uniti.

Il ventaglio dei prodotti di CAD Schroer include soluzioni CAD 2D/3D, per l'impiantistica, la progettazione di impianti e la gestione dati. I clienti in 39 paesi si affidano a MEDUSA®, MPDS™ e STHENO/PRO® per fornire un ambiente di progettazione integrato, efficiente e flessibile per tutte le fasi della progettazione dei prodotti e degli impianti, ció permette di tagliare i costi e migliorare la qualità. CAD Schroer attribuisce una grande importanza alla stretta collaborazione con i clienti e supporta gli obiettivi dei suoi clienti mediante un ampio ventaglio di servizi di consulenza, addestramento, sviluppo, supporto software e manutenzione.
Contatti
Marco Destefani
CAD Schroer GmbH
Fritz-Peters-Straße 11
47447 Moers
Germania

Sito web: www.cad-schroer.it
Email: marketing@cad-schroer.com

Telefono:
 
Italia: +39 02 49798666
Germania: +49 2841 9184 0
Svizzera: +41 44 802 89-80
Regno Unito: +44 1223 460 408
Francia: +33 141 94 51 40
USA: +1 866-SCHROER (866-724-7637)

]]>
Global Transportation Manufacturing Market Is Valued At $8 Trillion In 2017 According To TBRC’s Latest Report Fri, 13 Jul 2018 08:35:10 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486074.html http://comunicati.net/comunicati/aziende/tecnologia/486074.html tbrc tbrc  

The transport manufacturing industry is one of the key segments of the global manufacturing industry. This industry manufactures vehicles which are used for transporting goods and people. Production of various vehicle components is also included in this industry.

Read the report at

https://www.thebusinessresearchcompany.com/report/transportation-manufacturing-global-market-report-2018 

The transportation manufacturing market is valued at $ 8 trillion in 2017. This can be attributed to the positive economic outlook, increasing demand for transportation services . Asia Pacific was the largest region in the transportation manufacturing market in 2017, accounting for two-fifth of the market share.

The transportation manufacturing market in The Business Research Company's report is divided into six segments. Motor vehicles were the largest segment of the market, accounting for more than two-fifths of the market share. Motor vehicle manufacturing account for more than thirty percent share of the market . Aircraft and components manufacturing accounted for one-tenth share of the market. Space, military, and other transportation, ship and boat building and repairing

Download a sample of the report at  

https://www.thebusinessresearchcompany.com/sample.aspx?id=321&type=smp

China was the largest country in the transportation manufacturing market in 2017, accounting for one-fifth of the market share. This was due to the presence of a large number of motor vehicles. China was followed by the USA and Germany.

The top five competitors in the market are Toyota Motor, Volkswagen Group, General Motors, Daimler AG, and Ford Moto. Toyota Motor Corporation (Toyota) was the largest company in the transport manufacturing market in 2017. It is engaged in the design, manufacture and sale of passenger cars, minivans, commercial vehicles, and related parts and accessories. It also provides financing for customers and dealers for Toyota vehicles.

About The Business Research Company.

The Business Research Company is a Business Intelligence Company, which excels into the company, market and consumer research. It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally.

Contact Information.

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email: info@tbrc.info

 

]]>
Global Motor Vehicles Manufacturing Market Is Valued At Around $3 Trillion in 2017 According To TBRC’s Latest Report Fri, 13 Jul 2018 08:02:43 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486071.html http://comunicati.net/comunicati/aziende/tecnologia/486071.html tbrc tbrc  

Motor vehicles manufacturing market motorcycles, bicycles, automobiles, light trucks and heavy-duty trucks.

Read More: https://www.thebusinessresearchcompany.com/report/motor-vehicles-manufacturing-market-global-briefing-2018 

The global motor vehicles manufacturing market is valued at around $ 3 Trillion in 2017. This is a period of two positive economic growth outlooks in both developed and developed economies, expected to increase in demand for hybrid and electric vehicles spurred by technological developments, innovation and changing environmental regulations.

Asia Pacific was the largest region in the motor vehicles market in 2017, accounting for more than one-third of the market share.

The motor vehicles manufacturing market in The Business Research Company The report is segmented into commercial vehicles, passenger cars, and motorcycle & bicycle. While the first two accounts for almost 95% of the market share, the remaining is attributed to the motorcycle & bicycle segment.

Sample Report: https://www.thebusinessresearchcompany.com/sample.aspx?id=575&type=smp 

China was the largest country in the motor vehicles market in 2017, accounting for more than one-fifth of the market share. This was the result of the growing demand for personal mobility and government subsidies on smaller engine vehicles. China was followed by the USA and Germany.

Toyota Motor Corporation (Toyota) was the largest company in the motor vehicles market in 2017, followed by Volkswagen AG and General Motor Company. Toyota is a multinational automotive manufacturer, headquartered in Aichi, Japan.

About The Business Research Company.

The Business Research Company is a Business Intelligence Company, which excels into the company, market and consumer research. It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally.

Contact Information.

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email: info@tbrc.info

 

]]>
The Global Advertising, Public Relations And Related Services Market Is Valued At Around $750 Billion In 2017 According To TBRC’s Latest Report Fri, 13 Jul 2018 07:55:04 +0200 http://comunicati.net/comunicati/aziende/tecnologia/486069.html http://comunicati.net/comunicati/aziende/tecnologia/486069.html The Business Research Company The Business Research Company The advertising, public relations and related services market comprises of establishments offering services for planning, developing, creating and managing advertisement and promotional activities.

Read the report at

https://www.thebusinessresearchcompany.com/report/advertising-public-relations-and-related-services-global-market-report-2018

The global advertising, public relations and related services market is valued at around $750 billion in 2017. Drivers of the market are increase in e-commerce businesses, emerging economies, digitalization and greater targeting of advertising.

In the report, the global advertising, public relations and related services market is divided into seven segments. Around two-fifth of the market is occupied by the advertising agencies, which is the largest segment. Promotional products occupies around one-fifth of the market share. The remaining share is occupied by the other segments namely, public relations, direct mail advertising, billboard and outdoor advertising, media buying agencies, media representative firms and print advertising distribution.

Download a sample of the report at

https://www.thebusinessresearchcompany.com/sample.aspx?id=32&type=smp

The USA was the largest country in the advertising, public relations and related services market in 2017, accounting for one-fourth of the market share. This was mainly due to a rise in number of new businesses and increased demand for online advertising and billboard advertising from companies across all industries. China and Japan are the next largest countries in the market.

The advertising, public relations and related services market is fragmented, with a number of large, global players. The top five competitors in the market made up above 8% of the total market share in 2017. WPP PLC was the largest competitor with 2.6% of the market, followed by Omnicom Group with 2%, Publicis Groupe S.A. WPP PLC was founded in 1985 and is currently headquartered in London, United Kingdom.

About The Business Research Company.

The Business Research Company is a Business Intelligence Company which excels in company, market and consumer research. It has offices in the UK, the US and India and a network of trained researchers in 15 countries globally.

Contact Information.

The Business Research Company

Europe: +44 207 1930 708

Asia: +91 8897263534

Americas: +1 315 623 0293

Email: info@tbrc.info

]]>